1
1.4Target groups
1.5Maintenance
1.6Forms of notation
Introduction | gis |
|
Furthermore, the installation must comply with the manufacturer’s instructions.
nRemark
Later amendments and/or additions to all regulations, requirements and guidelines published on or prior to the moment of installing, will apply to the installation.
The three target groups for this manual are:
•(end) users;
•installers;
•service and maintenance engineers.
Symbols on each page indicate the target groups for whom the information is intended. See Table 1.1.
Table 1.1 Target group symbols
Symbol | Target group |
|
|
g | (End) user |
|
|
i | installer |
|
|
s | Service and maintenance engineer |
|
|
A service should be carried out at least once a year, both on the water side and on the gas side. Maintenance frequency depends, among other things, on the water quality, the average burning time per day and the set water temperature.
nRemark
To determine the correct maintenance frequency, it is recommended to arrange for the service and maintenance engineer to check the appliance on both the water and gas side, three months after installation. Based on this check, the best maintenance frequency can be determined.
nRemark
Regular maintenance extends the service life of the appliance.
The following notation is used in this manual:
nRemark
Important information
cNote
Ignoring this information can lead to the appliance being damaged.
Warning
Failure to carefully read this information may lead to danger of personal injury, and serious damage to the appliance.
10 | Instruction Manual BFC |
