8
8.6Extra period
8.6.1
EXTRA |
|
|
10:00 | Monday | 76ÉC |
MO 11:15 Tset 75ÉC
PERIOD ACTIVATED
Figure 8.28 Extra period active
Main menu | gis |
|
Introduction
Use an extra period when you either want to have the appliance switch on and off for a certain period, either without modifying the active week program, or without taking the appliance out of OFF mode (frost protection active).
If the appliance is running under an ‘extra period’, then this is indicated in the display with the text EXTRA. See Figure 8.28.
If the water temperature becomes too low during the extra period (see
’8.6.2 Programming an extra period’), the appliance will run through the heating cycle (see ’7.4 The appliance’s heating cycle’), then fall back into the extra period.
The same settings can be made for an extra period as for a week program period. See paragraph ’8.5.3 Changing the appliance’s standard week program’.
8.6.2
MENU
ON
^WEEK PROGRAM ȻEXTRA PERIOD
Figure 8.29 Extra period
ON | SU»08:00 |
|
OFF | SU 08:00 |
|
Tset | 65ÉC |
|
PUMP | ON | START |
|
|
|
Figure 8.30 Setting switch-on hour for extra period
ON | SU 08»15 |
|
OFF | SU 08:15 |
|
Tset | 65ÉC |
|
PUMP | ON | START |
|
|
|
Figure 8.31 Setting the switch- on minutes for extra period
ON | SU 08:15 |
|
OFF | SU»08:15 |
|
Tset | 65ÉC |
|
PUMP | ON | START |
|
|
|
Figure 8.32 Setting switch-off hour for extra period
ON | SU 08:15 |
|
OFF | SU 12»15 |
|
Tset | 65ÉC |
|
PUMP | ON | START |
|
|
|
Figure 8.33 Setting the switch- off minutes for extra period
Programming an extra period
Bring up the menu for entering an extra period via:
1.B:EXTRA PERIOD
Confirm with E.
The display show the settings for the extra period. See Figure 8.30.
Setting the switch-on time
2.Use Hand Lto select the day desired. In the example this is SU. Confirm with E.
The cursor moves to the hour digits, which will blink. See Figure 8.30.
3.Use Hand Lto set the
Confirm with E.
The cursor moves to the minute digits, which will blink. See Figure 8.31.
nRemark
Because the
4.Use Hand Lto select the minutes. In the example this is 15. Confirm with E.
The cursor moves to the hour digits of the
Setting switch-off time
5.Use Hand Lto select the hour. In the example this is 12. Confirm with E.
The cursor moves to the minute digits, which will blink. See Figure 8.33.
6.Use Hand Lto select the minutes. In the example this is 45. Confirm with E.
60 | Instruction Manual BFC |
