Chapter 4. Example Operations

According to the DS0 Map work sheet, Passthru for this DS0 should be set to Y for Yes (see Figure 4-7).

Figure 4-7

Passthru Selection Field

Scroll down to display the Y and press Enter to select. The cursor advances to the PORT selection field.

If the Port is set to DSX-1 the TSU 600 will automatically set the Passthru (PT) bit to Y.

Scroll down to advance through the Port list until the

6.1DSX-1 Port name is displayed (see Figure 4-8). Press Enter to select and move the cursor back to the DS0 # field.

Figure 4-8

Display of DS0 Port Name

Another DS0 may be selected by incrementing the DS0 number using the up arrow key or, for this example, typing number 2.

Since the data for this DS0 is identical to the previous DS0 just entered, it can be duplicated using Copy. The PT and PORT data fields are set to the same value as was last entered.

61200.076L2-1

TSU 600 User Manual

93

Page 105
Image 105
ADTRAN TSU 600 user manual Passthru Selection Field, Display of DS0 Port Name