ADTRAN TSU 600 user manual Option Ports, Secondary Interfaces SI, Other Data Interfaces

Models: TSU 600

1 133
Download 133 pages 17.65 Kb
Page 24
Image 24

Chapter 1. Introduction

OPTION PORTS

The option ports vary depending on the option modules installed.

Secondary Interfaces (SI)

The secondary interface is an additional interface to a DS1, a DSX1 facility, or some other network service, and it offers a source of timing. The type of interface depends on the option module installed. The interface includes the following:

DSX1. Passthru for operation with a PBX (Terminal Interface - TI).

Full Drop and Insert. Permits the dropping of data and insertion of new data into the same DS0 time slot. This SI module includes a long haul DS1 interface. It can also be used as a second DS1 interface to provide an up to 3 Mbit aggregate throughput.

Other Data Interfaces

Additional data interfaces can be installed in the option slot, and include the following:

Nx56/64 serial interface. This module is the same as the base Nx interface but offers single or dual V.35 ports.

Voice interface. 2/4 channel FXS/FX0/E&M.

OCU DP. Interfaces to DDS or 4-wire Switched 56.

Dial backup.

12

TSU 600 User Manual

61200.076L2-1

Page 24
Image 24
ADTRAN TSU 600 user manual Option Ports, Secondary Interfaces SI, Other Data Interfaces