
Chapter 2. Installation
Set Control Port
The TSU 600 can be configured from the control port only when a unit ID number has been entered. (It can be configured from the faceplate whether a unit ID number has been entered or not.)
If the control port is to be used, the control port baud rate must also be selected.
Possible uses of the control port are control in and
Control In (PC)
The unit can be controlled from an external PC con- nected directly or via modem to the Control In port. When using Control In, the selection of the Control Port baud rate from 9600 (factory default), 1200, 2400, or 4800 must be made using the Unit Configuration menu.
Unless locked out externally, the front panel can also control the unit.
Chain-in
TSU 600s and TSU 100s can be linked together to form a chain. Figure
Subsequent TSUs in the chain are in a position to intake information from another TSU. This
Unless locked out externally, the front panel can also control the unit.
36 | TSU 600 User Manual |