Time/Date | ADTRAN TSU 600 specs

Chapter 3. Operation

Time/Date

This menu option is used to view or to edit the current time and date. The time and date are maintained during power off conditions.

Operation

Follow standard operating procedure to access the 3)UTIL menu items.

With the cursor on 1)TIME/DATE, activate the menu with Enter or number 1. The unit displays the current time and date with the cursor on the T in Time.

Use Enter to move to the first entry position and numbers to set the desired hour and minutes. Always use Enter to record the numbers and move to the next position. The Up and Down Arrow keys can also move the cursor to different fields to edit.

The Date is set using the same keystroke pattern used to set Time

To exit the TIME/DATE setting, press Cancel. The unit returns to the opening of TIME/DATE setting with the cursor on the 2 of 2)TIME/DATE. Any settings completed with an Enter keystroke have been recorded. Any settings not completed by an Enter keystroke are not recorded.

Summary for Editing Time/Date

Pressing Enter after any numeric change always records the entry and moves to the next editing position. Moving to a different field to edit is also possible by pressing Enter at the editing position without making any change, or by using the Up and Down Arrow keys. Pressing Cancel at any time can be used to end the editing process.

61200.076L2-1

TSU 600 User Manual

71

Image 83

ADTRAN TSU 600 user manual Time/Date

Contents

Part Number 1200076L2 1200076L2#DC TSU Table of Contents Service Type Table of Contents Table of Contents Installation Operation Table of Contents Example Operations Figures 15. Drop and Insert, Voice, and Bridging Application Set Up Tables T1/FT1 Overview T1 Service Offerings Fractional T1 Front View of the TSU TSU 600 OverviewFunctional Description Introduction TSU 600 Rear Panel Identification of Rear Panel Layout Features of the TSU TSU 600 Interfaces TSU InterfacesNetwork Interface Chain Port Output Control Port Input Snmp Three Methods of ControlFront Panel Adtran PC Program Slots Option Slot ArrangementSlot TSU 600 Option Slot Arrangement Other Data Interfaces Option PortsSecondary Interfaces SI Network Timed Clock Source TSU 600 Clock SourcesNetwork Timed DTE Clock Source DTE Timed Internal Clock Source Internal Timing Normal CSU Timing Loopback Tests TSU 600 TestingSelf Tests Network Loopback Tests TSU Port Interface Loopback DTE Interface Loopback Pattern Generation Bridge, PBX, Video Conferencing Application TSU 600 Configuration ApplicationsBridge, PBX, Video Conferencing Application Set Up TSU 600 Option Modules All Voice Application All Voice Application Set Up Variations of Mixed Applications Drop and Insert, Voice, and Bridging Application Variations of Mixed Applications Provided by Customer UNPACK, INSPECT, Power ConnectionShipped by Adtran Power Connection Warranty and Customer Service Grounding Instructions UL Installation Network Pinout WiringNetwork GND Control In/Chain-in Chain-out Pinout Chain-out Self Test Power UP Testing and Initialization To Establish a Passcode Set User Passcode No Passcode Desired Set Unit Identification Control In PC Set Control Port Example of Chain-in Correct Passcode Normal Power-Up Procedure Identification of Front Panel Layout Operation TSU TSU 600 Front Panel Layout Alarm red Used in various menus to clear data/result fields Select a Menu Item General Menu Operation Sample Submenu Display and Data Fields Data Port Identification Module Slots, TSU Four Opening Menus Menu Structure Display of Opening Menus Opening Menu Functions Shows status of incoming commands on the chain-in port Displays and can be used to set the time and date Opening Menu Functions Detailed Discussion Complete Status Menu Status Network Interface Performance Report Network Performance Reports NI Perf Rpts1NI Perf Rpts Network Interface Errors NI Errors Network Interface Error Type Active Alarms Port Status View History Remote Port Complete Configuration Menu Configuration Config D4 is equivalent to superframe format SF YEL AlarmNetwork NI Format Inband Lpbck Xmit PRMClock Source SET LBO Traps AccessCTL Port Auto Map Exchange Selection DisplayOFF Selection Times for Map Exchange DS0 Map Designations Create Temp Copy a Temp Review MAP AB Create Temp Selection Screen Edit Temp Selected Port and Quantity of DS0sReview Temp Apply Temp a Port Configuration Port Configuration Port Config Complete Utility Menu Tree Utility Util Time/Date Factory Restore Set Passcode Unit ID ID Software Revision Software Rev Port Utility Complete Test Menu Test Network Tests Remote Loopbck Qrss always runs at 64K/DS0 All zeros Since the start of testing Bit errorThan 1 bit error and less than Than 320 bit errors Run Selftest Port Tests Cancel Tests Operation Example of Voice and Data Mix Voice and Data MIX Prior to Step Steps to SET UP Voice and Data MIXConfigure the Network Configuration for Network Interface Select the number of DS0s/Port12 Configure DTE Port 1.1 Nx56/64 From Option ModuleConfiguration for DTE Port Nx56/64 Complete the DS0 Map ConfigurationConfiguration for DS0 Map First Two Configuration Menu Items Complete a Configuration Table for the DSX-1 PBX PassthruActivate Configuration Menu Configuration for DSX-1 PBX Passthru First Two Network NI Configuration Menu Items Configuring the Network Interface First Two Network NI Menu Items Create Map Menu with Displayed DS0 Number Configuring the DS0 MAPDS0 Map a and Map B Configuration Menu Items Display of DS0 Port Name Passthru Selection Field Example Operations Review Screen Temporary MAPReview Window Showing Edit Temp Option Edit Window Showing the Error Screen Used To Change Mode Configuring the PortsWindow Showing Port Configuration Option Example Operations Far End Looped Back Test Testing Example 101 Test Menu One Four Test Submenu Windows Test Pattern Screen for Qrss all DS0s Screen that Appears During Loopback Verification SES Pressing the 2 key results in injecting errors Test Termination 106 Appendix a Figure A-1 TSU 600 Complete Menu Tree DTE Data Rate Chart DTE RATE=56K DTE RATE=64K DTE Data Rate vs. DS0s Configure Network Appendix C System Configuration Charts Select number of DS0s/PORT Configure DTE Port 1.1 Nx56/64Configuration Chart for DTE Port Rate Chart DS0 Map B Configuration DS0 Map a ConfigurationDS0 Map B Configuration DS0 Map a Configuration 114 Status Messages Network Interface NI Alarm Messages Network Interface NI 116 Index Symbols DTE Qrss 120 Product Support Information