
Chapter 3. Operation
APPLY TEMP > A
Writes the TEMP map into Map A. Apply is usually the last step in updating a map and is accessed auto- matically at the end of editing or creating a temporary map. It can be bypassed at this time by selecting another menu choice.
Selecting Apply does not disrupt normal data flow while the current map is overwritten with the new map. This will not cause a switch of the executing map; i.e., if Map A were modified while Map B was executing, selecting Apply will rewrite Map A but will not switch execution from Map B to Map A.
Access 6)APPLY TEMP > A by following standard operating procedures or by completing a scratch map. Press Enter or number 6. The unit displays DISRUPT DATA: YES or NO.
Scroll to select Yes or No.
Yes The display shows MAP APPLIED.
No The system returns to menu item 6)APPLY.
When the desired selection is displayed, press Enter to activate the selection, followed by Cancel to return to menu operation.
68 | TSU 600 User Manual |