Copy a Temp, Create Temp | ADTRAN TSU 600 specification

Chapter 3. Operation

Operation

The operation of DS0 Map A and Map B is identical. With the cursor on 5)DS0 MAP A, press Enter or number 5. The unit displays the first two DS0 Map A submenu items with the cursor on 1)COPY A> TEMP.

DS0 Map A and Map B Menu Items

The menu items are:

COPY A >TEMP

This copies the current map (A or B) into a TEMP map area. This permits modification without disturbing the existing map. When the modifications are com- pleted the TEMP map is written to current MAP A (B) by selecting Apply.

CREATE TEMP

This creates a map by defining a port or Idle for all DS0s. Any or all of the DS0s can also be designated for Passthru if a secondary interface capable of Passthru is present. When 2)CREATE TEMP is selected, all DS0s are set to Idle, and those in use are set to the proper port.

A sample selection follows: DS0: 01 to 24 PASSTHRU: Y for Yes

N for No

PORT: IDLE, TST, + option module ports

TST is used to designate which DS0s are used for QRSS testing when activated under the 4)TEST Menu. When not used for testing, the TST designation is identical to IDLE.

With the cursor on 2)CREATE TEMP, press Enter. The unit displays the selection screen with the cursor positioned on the first selection DS0 number. See Figure 3-16.

61200.076L2-1

TSU 600 User Manual

65

Image 77

ADTRAN TSU 600 user manual Copy a Temp, Create Temp

Contents

Part Number 1200076L2 1200076L2#DC TSU Table of Contents Service Type Table of Contents Table of Contents Installation Operation Table of Contents Example Operations Figures 15. Drop and Insert, Voice, and Bridging Application Set Up Tables T1/FT1 Overview T1 Service Offerings Fractional T1 Front View of the TSU TSU 600 OverviewFunctional Description Introduction TSU 600 Rear Panel Identification of Rear Panel Layout Features of the TSU TSU 600 Interfaces TSU InterfacesNetwork Interface Chain Port Output Control Port Input Front Panel Three Methods of ControlAdtran PC Program Snmp Slots Option Slot ArrangementSlot TSU 600 Option Slot Arrangement Other Data Interfaces Option PortsSecondary Interfaces SI Network Timed Clock Source TSU 600 Clock SourcesNetwork Timed DTE Clock Source DTE Timed Internal Clock Source Internal Timing Normal CSU Timing Loopback Tests TSU 600 TestingSelf Tests Network Loopback Tests TSU Port Interface Loopback DTE Interface Loopback Pattern Generation Bridge, PBX, Video Conferencing Application Set Up TSU 600 Configuration ApplicationsTSU 600 Option Modules Bridge, PBX, Video Conferencing Application All Voice Application All Voice Application Set Up Variations of Mixed Applications Drop and Insert, Voice, and Bridging Application Variations of Mixed Applications Provided by Customer UNPACK, INSPECT, Power ConnectionShipped by Adtran Power Connection Warranty and Customer Service Grounding Instructions UL Installation Network Pinout WiringNetwork GND Control In/Chain-in Chain-out Pinout Chain-out Self Test Power UP Testing and Initialization To Establish a Passcode Set User Passcode No Passcode Desired Set Unit Identification Control In PC Set Control Port Example of Chain-in Correct Passcode Normal Power-Up Procedure Identification of Front Panel Layout Operation TSU TSU 600 Front Panel Layout Alarm red Used in various menus to clear data/result fields Select a Menu Item General Menu Operation Sample Submenu Display and Data Fields Data Port Identification Module Slots, TSU Four Opening Menus Menu Structure Display of Opening Menus Opening Menu Functions Shows status of incoming commands on the chain-in port Displays and can be used to set the time and date Opening Menu Functions Detailed Discussion Complete Status Menu Status Network Interface Performance Report Network Performance Reports NI Perf Rpts1NI Perf Rpts Network Interface Errors NI Errors Network Interface Error Type Active Alarms Port Status View History Remote Port Complete Configuration Menu Configuration Config Network NI YEL AlarmFormat D4 is equivalent to superframe format SF Clock Source Xmit PRMSET LBO Inband Lpbck Traps AccessCTL Port Auto Map Exchange Selection DisplayOFF Selection Times for Map Exchange DS0 Map Designations Create Temp Copy a Temp Review MAP AB Create Temp Selection Screen Edit Temp Selected Port and Quantity of DS0sReview Temp Apply Temp a Port Configuration Port Configuration Port Config Complete Utility Menu Tree Utility Util Time/Date Factory Restore Set Passcode Unit ID ID Software Revision Software Rev Port Utility Complete Test Menu Test Network Tests Remote Loopbck Qrss always runs at 64K/DS0 All zeros Than 1 bit error and less than Bit errorThan 320 bit errors Since the start of testing Run Selftest Port Tests Cancel Tests Operation Example of Voice and Data Mix Voice and Data MIX Configure the Network Steps to SET UP Voice and Data MIXConfiguration for Network Interface Prior to Step Select the number of DS0s/Port12 Configure DTE Port 1.1 Nx56/64 From Option ModuleConfiguration for DTE Port Nx56/64 Complete the DS0 Map ConfigurationConfiguration for DS0 Map Activate Configuration Menu Complete a Configuration Table for the DSX-1 PBX PassthruConfiguration for DSX-1 PBX Passthru First Two Configuration Menu Items First Two Network NI Configuration Menu Items Configuring the Network Interface First Two Network NI Menu Items Create Map Menu with Displayed DS0 Number Configuring the DS0 MAPDS0 Map a and Map B Configuration Menu Items Display of DS0 Port Name Passthru Selection Field Example Operations Review Screen Temporary MAPReview Window Showing Edit Temp Option Edit Window Showing the Error Screen Used To Change Mode Configuring the PortsWindow Showing Port Configuration Option Example Operations Far End Looped Back Test Testing Example 101 Test Menu One Four Test Submenu Windows Test Pattern Screen for Qrss all DS0s Screen that Appears During Loopback Verification SES Pressing the 2 key results in injecting errors Test Termination 106 Appendix a Figure A-1 TSU 600 Complete Menu Tree DTE Data Rate Chart DTE RATE=56K DTE RATE=64K DTE Data Rate vs. DS0s Configure Network Appendix C System Configuration Charts Configuration Chart for DTE Port Configure DTE Port 1.1 Nx56/64Rate Chart Select number of DS0s/PORT DS0 Map B Configuration DS0 Map a ConfigurationDS0 Map a Configuration DS0 Map B Configuration 114 Status Messages Network Interface NI Alarm Messages Network Interface NI 116 Index Symbols DTE Qrss 120 Product Support Information