English
Radio Operation
Manual Storing of Station
Presets
A total of 24 stations can be stored in the preset
2
3 1memory (6 stations for each band; FM1, FM2, AM or D.A.P.).
1
PAGE 1/2
Tune in a desired radio station you wish to store in the preset memory by manual or automatic seek tuning.
Press the FUNC (PAGE 1/2) button.
2
P.SET 1
P.SET 2
P.SET 3
P.SET 4
P.SET 5
P.SET 6
Press and hold any one of the Function buttons
1(P.SET1) through 6 (P.SET6) for at least 2 seconds until the Function Guide indicators P.SET1 through P.SET6 in the display blinks (for 5 seconds).
3
P.SET 1
P.SET 2
P.SET 3
P.SET 4
P.SET 5
P.SET 6
Press the Function button into which you wish to store the station while the Function Guide indicators P.SET1 through P.SET6 in the display are blinking (within 5 seconds).
The Function Guide indicators in the display stops blinking, indicating that the station has been memorized at the Function button pressed.
4 | Repeat the above procedure (1 to 3) to store up |
| |
| to 5 other stations onto the same band. |
| To use this procedure for other bands, simply |
| |
| select the band desired and repeat the |
| procedure. |
| Note: If a preset memory has already been |
| set in the same Function button, it will |
| be cleared and the new station will be |
| memorized. |
36
