Alpine 68P21523Y62-B owner manual 124, Adjusting Cross-Over Over Point of 2-Way Divider

Audio Processor	English
Operation (Optional)

Adjusting Cross-Over

(X-Over) Point of 2-Way

Divider

			If an optional Alpine Channel Divider PRA-H400
5	2	4 8	is connected, you can control the Divider from
			the CVA-1005.
	3 6 7 1		Use this procedure when one or two 2-way-
			system or 3-way system channel dividers are
			connected.
1			Press the SOURCE button.
			The main menu screen appears on the display.

2

3

A.PROC	Press the 4 (A.PROC) button.
	The display shows the Audio Processor list
	screen.

Rotate the rotary encoder and select the "Divider" (when one divider is connected) or "Divider-F and Divider-R" (when two dividers are connected), then press the rotary encoder to execute the selection.

The display changes to the Divider mode screen.

4

5

RETURN	Press and hold the FUNC (RETURN) button for
	at least 2 seconds.
	The mode changes to the Divider Adjustment
	mode.
	Press the 1 (X-OVER) button. The mode
X-OVER
	changes to the Cross-Over Adjustment mode.

(To be continued)

124