1
2
| Auxiliary Device | English |
|
| |
| Operation |
|
| Operating Auxiliary |
|
| Devices |
|
| To operate a device connected to the AUX | |
1 2 | Input terminals on the rear panel of CVA- | |
1005, follow the procedure described below. | ||
| To activate your auxiliary devices: |
|
| To watch a video source, your vehicle must be | |
| parked with the ignition key in the ACC or ON | |
| position. To do this, follow the procedure below. | |
1.Push the foot brake to bring your vehicle to a complete stop at a safe location. Engage the parking brake.
2.Keep pushing the foot brake and release the parking brake once then engage it again.
3.While the parking brake is being engaged the second time, release the foot brake.
Note: For automatic transmission vehicles, place the transmission lever in the park position.
Now, the locking system for the auxiliary device operation has been released. Unless the ignition key is turned to the OFF position, the auxiliary device can be activated by engaging the parking brake without performing the above procedure (1 through 3).
Each time the ignition key is turned to the OFF position, perform the above procedure.
Note: If you try to activate the auxiliary device while driving, the display will show the warning-
CAN'T OPERATE WHILE DRIVING.
Press the SOURCE button.
The main menu screen appears on the display.
Rotate the rotary encoder and select "AUX", then press the rotary encoder to execute the selection.
Note: If the AUX mode is not displayed on the main menu, select "AUX IN" in the Initialization mode screen and set the AUX1 or AUX2 mode to the ON position.
94
