Appendix A. Installing the Battery Backup Unit

The Battery Backup Unit (BBU) is an add-on that can be attached to a 3ware 9000 RAID controller to supply power to the memory module from an attached battery pack in the event of a system power loss. This allows the controller to use write-caching for optimal performance and not be exposed to data loss in the event of a system power failure. When fully charged, the battery preserves the contents of the controller cache memory for a limited period of time (up to 72 hours). When power is restored, cached data is flushed to disks.

Caution: Both the 3ware RAID controller and the Battery Backup Unit are sensitive electronic equipment and can be damaged through electrostatic discharge.

When installing the BBU on the controller, be sure you are grounded. Use a grounding strap, or work on an ESD-protective mat.

„Do not remove the 3ware controller or BBU from their protective bags until you are properly grounded.

„Handle the 3ware RAID controller by its edges or by the black rail and metal bracket at its two ends.

„Do not touch any pin, contact, lead, or component on the 3ware RAID controller.

Important: The battery is a heat-sensitive component. The cooler the battery, the longer the battery lasts. If possible, place the controller with the BBU in a slot with good airflow, away from components that generate the most heat in the system, such as video cards.

www.3ware.com

99

Page 107
Image 107
AMCC 9000 manual Appendix A. Installing the Battery Backup Unit