Driver Installation Under SuSE Linux
Installing the 3ware Driver and SuSE
Linux with YaST2 on a New Unit
Note: If SuSE Linux is already installed on another drive, turn to “Installing the 3ware Driver on a SuSE Linux System that Boots from a Different Device” on page 81.
1Boot directly from the SuSE installation CD #1 or DVD.
2When installing SuSE, press the F6 key
You will then be prompted to insert the driver disk.
3Insert the 3ware Linux driver installation diskette.
4Click OK and continue with installation.
Installing the 3ware Driver on a SuSE Linux System that Boots from a Different Device
1Log in as root.
2Edit /etc/sysconfig/kernel and make sure the file contains the following line:
INITRD_MODULES="reiserfs
Note: Other modules may be listed before or after 3w- 9xxx, depending on the installation. You may see entries like reiserfs, ext3 or scsi_mod. If present, leave them (ensuring there is a space between each module name), since the system needs them to boot properly.
www.3ware.com | 81 |
