Configuring Units
Exiting 3BM
When you are ready to exit the 3BM configuration utility, you have the option to save the configuration changes you have made, or to discard the changes.
To save your configuration modifications
1Press the F8 or Esc key.
A list of affected drives appears, and a message asks you to confirm the configuration.
2Type Y.
3BM closes and the booting process resumes.
To exit without saving changes
1Press Esc.
If you have made changes that you have not saved, you are asked whether to save them, or not.
2Select No to discard your changes.
Note: If you make changes on the Policy screen, those changes are saved when you leave the Policy screen. Whether you press F8 or Esc to leave 3BM will not have an effect on those changes. For more information, see the 3ware 9000 Series Serial ATA RAID Controller User Guide.
363ware 9000 Series Serial ATA RAID Controller Installation Guide
