Configuring Units
Note: Striping size is not applicable for RAID 1, because it is a mirrored array without striping.
In general, use smaller stripe sizes for sequential access (such as video access) and larger stripe sizes for random access (such as a database).
Figure 14. Stripe Sizes for a RAID 5
For information about the field “Continue on Source Error,” see the 3ware 9000 Series Serial ATA RAID Controller User Guide.
To confirm unit configuration
1Press Tab to select the OK button and press Enter to confirm creation of the unit.
Or, if you want to cancel the creation of the unit, tab to Cancel and press Enter.
The unit is not actually created and no data is overwritten until you have finished making all your changes and press F8.
443ware 9000 Series Serial ATA RAID Controller Installation Guide
