Specifying the Unit Configuration
2If you have additional drives, go ahead and configure an additional RAID unit or designate a hot spare. Then continue on with the next section. (For details about hot spares, see page 46.)
3If you configured more than one unit, and you plan to install the operating system on one of them, make that unit be the first unit (Unit 0) in the list of Exportable Units.
To move a unit up in the list, highlight it and press the Page Up key.
4When you are finished configuring units, press F8 to save the changes and exit 3BM.
A warning message asks you to confirm that all existing data on the drives will be deleted.
Figure 15. Confirmation Message when Saving and Exiting
5Type Y to continue, delete any existing data on the drives, and create the unit.
www.3ware.com | 45 |
