Driver Installation Under Windows
After the driver has been installed, continue with the instructions under “Making Units Managed by a 3ware Controller Available to Windows” on page 63.
To install the 3ware driver under Windows XP or 2003
When you start Windows after installing a 3ware RAID controller, Windows recognizes it as a Plug and Play device, and brings up the Found New Hardware Wizard. This wizard guides you in installing the 3ware drivers (see Figure 21). Note that you will see screens for the installation of two drivers during this process.
Figure 21. Found New Hardware Wizard, Windows XP and 2003
1Click the Next button and respond to the questions the Wizard displays.
2When the Wizard prompts you to select a device driver, click Have Disk, and then indicate that it is on the CD or floppy.
3If the “Digital Signature Not Found” message appears, click Yes to continue the installation.
603ware 9000 Series Serial ATA RAID Controller Installation Guide
