Installing the Driver on a System that Boots from a Different Device
To install the 3ware driver under Windows 2000
When you start Windows after installing a 3ware RAID controller, Windows recognizes it as a Plug and Play device, and brings up the Found New Hardware Wizard. This wizard guides you through installing the 3ware drivers (see Figure 17). Note that you will see screens for the installation of two drivers during this process.
Figure 17. Found New Hardware Wizard, Windows 2000
1Click the Next button and respond to the questions the Wizard displays using the default selections.
2When the Wizard prompts you to select a device driver, click Have Disk, and then indicate that it is on the CD or floppy.
3If the “Digital Signature Not Found” message appears, click Yes to continue the installation.
www.3ware.com | 57 |
