AMCC 9000 manual Specifying the Unit Configuration, Basic Steps for Creating a Unit

Configuring Units

Table 4: Working in 3BM

To do this	Use these keys
Exit the utility and save or abandon	Esc
all changes.
Exit the utility and save all changes	F8

Specifying the Unit Configuration

You can implement one or more units of supported RAID levels on a single controller, depending on the number of drives that the specific 3ware RAID controller supports and the number of drives attached.

Basic Steps for Creating a Unit

The process of configuring your RAID units includes these main steps, which are detailed in the step-by-step example:

„Select the drives to be included and indicate that you want to create a disk unit

„Choose the desired RAID configuration

„Set other parameters, depending on the type of RAID configuration

„Confirm the unit configuration

„Save your changes

To select the drives and create a disk unit

1Select the drives to be included by highlighting each one and pressing Enter to select it.

When you select a drive, an asterisk appears next to it in the left-most column (see Figure 10).

403ware 9000 Series Serial ATA RAID Controller Installation Guide