AMD SC2200 manual Par, Perr# Frame#, Irdy#, Trdy#

32580B Signal Definitions

3.4.6PCI Bus Interface Signals (Continued)

Signal Name	BalL No.	Type	Description	Mux
PAR	J4	I/O	Parity. Parity generation is required by all PCI agents.	D12
			The master drives PAR for address- and write-data
			phases. The target drives PAR for read-data phases. Par-
			ity is even across AD[31:0] and C/BE[3:0]#.
			For address phases, PAR is stable and valid one PCI
			clock after the address phase. It has the same timing as
			AD[31:0] but is delayed by one PCI clock.
			For data phases, PAR is stable and valid one PCI clock
			after either IRDY# is asserted on a write transaction or
			after TRDY# is asserted on a read transaction.
			Once PAR is valid, it remains valid until one PCI clock
			after the completion of the data phase. (Also see
			PERR#.)
FRAME#	D8	I/O	Frame Cycle. Frame is driven by the current master to	---
			indicate the beginning and duration of an access.
			FRAME# is asserted to indicate the beginning of a bus
			transaction. While FRAME# is asserted, data transfers
			continue. FRAME# is de-asserted when the transaction
			is in the final data phase.
			This signal is internally connected to a pull-up resistor.
IRDY#	F2	I/O	Initiator Ready. IRDY# is asserted to indicate that the	D14
			bus master is able to complete the current data phase of
			the transaction. IRDY# is used in conjunction with
			TRDY#. A data phase is completed on any PCI clock in
			which both IRDY# and TRDY# are sampled as asserted.
			During a write, IRDY# indicates that valid data is present
			on AD[31:0]. During a read, it indicates that the master is
			prepared to accept data. Wait cycles are inserted until
			both IRDY# and TRDY# are asserted together.
			This signal is internally connected to a pull-up resistor.
TRDY#	F1	I/O	Target Ready. TRDY# is asserted to indicate that the tar-	D13
			get agent is able to complete the current data phase of
			the transaction. TRDY# is used in conjunction with
			IRDY#. A data phase is complete on any PCI clock in
			which both TRDY# and IRDY# are sampled as asserted.
			During a read, TRDY# indicates that valid data is present
			on AD[31:0]. During a write, it indicates that the target is
			prepared to accept data. Wait cycles are inserted until
			both IRDY# and TRDY# are asserted together.
			This signal is internally connected to a pull-up resistor.

58 AMD Geode™ SC2200 Processor Data Book