4. INSTRUMENT SETUP

Contact Arizona Instrument Customer Service at 800-528-7411 or 602-470-1414 or by e-mail at support@azic.com if you have any questions about the following instructions.

The MAX 5000XL is designed to provide reliable results under normal ambient conditions in the laboratory and on the production floor. Compliance with the following guidelines will help ensure optimum accuracy in minimum time.

∙Set up the MAX 5000XL on a stable, even surface that is not exposed to vibrations. Select a location for the instrument that is:

Firm and level,

Free from vibration that will affect the balance measurements,

Close to an isolated power outlet that will provide dedicated electrical power, and

Away from the direct flow of a fan or heating/air-conditioning outlet that might produce force on the balance

∙Adjust the feet under the instrument to center the bubble in the level located under the lid.

∙An operational clearance of at least 20 cm (8 inches) above the instrument is recommended.

∙Keep all cables as short as possible, less than 2 meters (6 feet) in length if possible.

∙Avoid placing the analyzer in close proximity to a heater or otherwise exposing it to heat or direct sunlight.

∙Avoid exposing the analyzer to extreme temperature fluctuations.

∙Protect the analyzer from drafts that come from opening windows, doors and air conditioning systems.

∙Keep the analyzer protected from dust and liquids as much as possible.

∙Protect the analyzer from caustic vapors.

∙Do not expose the analyzer to saturated humidity environments.

∙Moisture in the air can condense on the surfaces of a cold analyzer whenever it is brought into a substantially warmer place. If you move the MAX 5000XL to a warmer area, make sure to condition it at room temperature, disconnected from AC power, for at least 2 hours, or until moisture condensation no longer occurs.

For those familiar with moisture analysis instruments, the MAX 5000XL should be simple to operate. However, please read all of the sections in this manual before attempting your first analysis.

AZI Customer Service 800-528-7411 or 602-470-1414

Page 12 of 92

Page 11 Page 13
Page 12
Image 12
Arizona MAX-5000XL user manual Instrument Setup
Page 11 Page 13

MAX-5000XL specifications

The Arizona MAX-5000XL is a premier flatbed printer designed for high-volume printing applications, renowned for its versatility and cutting-edge technology. This remarkable machine is part of the Arizona series from Océ, a brand recognized for its innovation in digital printing solutions. The MAX-5000XL is specifically engineered to deliver high-quality graphics across various substrates, making it a favorite among businesses in signage, graphics, and packaging industries.

One of the standout features of the MAX-5000XL is its expansive printing capacity. With a maximum bed size of 126 x 98 inches, it can accommodate large sheets, enabling the production of oversized prints without the need for cumbersome tiling or trimming. This feature not only saves time but also enhances operational efficiency, allowing businesses to streamline their workflow.

The MAX-5000XL employs advanced UV printing technology, which uses ultraviolet light to cure the ink instantly as it is printed. This results in vibrant colors, sharp details, and improved durability, making prints resistant to scratches, chemicals, and UV exposure. The printer’s ink system features highly pigmented inks that produce stunning images, offering a wide color gamut that is perfect for demanding graphical applications.

Moreover, the printer is equipped with a sophisticated high-resolution imaging system that delivers outstanding print quality at resolutions up to 1440 dpi. This level of detail ensures that even the finest elements of a design are replicated with precision. The machine also incorporates a variable dot technology that optimizes ink droplet size based on the image content, further enhancing the overall image quality.

Another notable characteristic of the Arizona MAX-5000XL is its user-friendly interface. The printer features intuitive software that simplifies setup, operation, and maintenance, enabling operators to focus more on production rather than troubleshooting. The machine also supports automated printing features, reducing manual intervention and helping to improve turnaround times.

In addition, the MAX-5000XL is designed with sustainability in mind. Its low-energy LED UV curing technology not only reduces energy consumption but also minimizes the environmental impact of the printing process. The ability to print on a wide range of substrates, including rigid and flexible materials, also expands the creative possibilities for designers while offering greater options for businesses looking to cater to diverse markets.

In summary, the Arizona MAX-5000XL is a state-of-the-art flatbed printer that combines large-format capabilities, exceptional print quality, and advanced technology. Its user-friendly features and emphasis on sustainability make it an ideal choice for businesses seeking to elevate their printing operations to new heights.
Top Page Image Contents