13. MAX 5000XL SPECIFICATIONS
Feature | Specification |
|
|
Size | 18.5” length x 12.7”width x 9.5” height |
|
|
| 470 mm length x 323 mm width x 240 mm height |
|
|
| (Height varies slightly with adjustable feet for leveling purposes.) |
|
|
Weight | 31 lbs. (14 kg) |
|
|
Casework | Textured aluminum castings |
|
|
Power Requirements |
|
| |
|
|
| |
| Fused on/off switch as part of an EMI power entry module |
|
|
Operating |
|
| |
Environment |
|
| |
|
|
| |
Moisture Range | 0.1 – 99.9% |
|
|
Heating Range | 25º C to 600º C |
|
|
Heater Calibration | Menu Driven |
|
|
| NIST Traceable using an accessory Temperature |
|
|
| Calibration Interface module |
|
|
| Calibration tolerance: |
|
|
| ± 1.5º C up to 275º C |
|
|
| ± 2º C up to 600º C |
|
|
| Twelve calibration points from 50º C to 575º C. |
|
|
| Twelve preset verification points from 50º C to 575º C, or |
|
|
| up to four |
|
|
| Programmable calibration reminder |
|
|
Temperature Control | ± 1º C at temperatures between 50º C and 300º C |
|
|
| ± 2º C at temperatures between 301º C and 600º C |
|
|
Test Temperatures | User programmable through front panel keypad to control |
|
|
| idle temperature, test temperature, and high start |
|
|
| temperature for all tests. |
|
|
| Multiple test temperatures are programmable for linked |
|
|
| test sequences |
|
|
Heater Chamber | Composite ceramic fiber lined heater chamber |
|
|
| Isolated from electronics to minimize damage from |
|
|
| corrosive sample materials |
|
|
| Oven self cleaning cycle (550º C for 45 minutes) |
|
|
Balance | Integrated balance with automatic operation |
|
|
| Balance capacity to 100 grams |
|
|
| Resistant to nominal vibration, with options available for |
|
|
| isolation feet |
|
|
| Resistant to air currents from internal exhaust fan |
|
|
| Isolated from extreme temperatures in the test chamber |
|
|
| Isolated from extreme changes in humidity caused by |
|
|
| evaporation in the test chamber |
|
|
AZI Customer Service | Page 87 of 92 |