Arizona MAX-5000XL user manual ∙ Select SETUP MENU, press ENT ∙ Select PRINTER SETUP, press ENT

To set up the MAX 5000XL, begin at the Main Test Screen and press [Menu], (center key below display) to access the Main Menu.

∙Select SETUP MENU, press [ENT].

∙Select PRINTER SETUP, press [ENT].

∙Highlight Parallel for printer only, RS-232 for computer only, and Both for the printer and computer at the same time. When the correct port selection is highlighted, press [ENT] again.

∙Move the select box to PRINTER TYPE and press [ENT].

∙Select the type printer you have and press [ENT].

∙Epson ESC/P2 is for older style Epson printers

∙Epson Raster is for Epson C84 and newer.

∙Seiko DPU is for the small, thermal printer.

∙Canon is for the older Canon Bubble Jet line of printers.

∙Move the select bar to AUTO FORM FEED. Pressing [ENT] toggles between YES and NO. Selection will depend on the printer used. Try Auto Form Feed YES for most printers. If the printer seems to waste paper, switch it to NO.

∙Press [ESC] to return to the REPORT SETUP Menu.

∙Select REPORT CONTROL OPTIONS, press [ENT].

∙Press [ENT] key to toggle between YES and NO. Select YES if you want to send test results and reports to a printer or computer and NO to prevent sending test results as outputs.

AZI Customer Service 800-528-7411 or 602-470-1414 Page 17 of 92