![5. MAIN MENU](/images/new-backgrounds/52520/5252045x1.webp)
![5.1. Memory Starts Menu](/images/new-backgrounds/52520/5252045xi2.webp)
![Manual background](/images/new-backgrounds/52520/5252045xi3.webp)
5. MAIN MENU
Press [MENU] to display the MAIN
MENU.
![Manual background](/images/new-backgrounds/52520/5252045xi5.webp)
5.1. Memory Starts Menu
Memory Starts are stored test parameter sets. The MEMORY START MENU allows access to the stored test parameter sets. This is where the contents of the stored parameters may be printed out or changed.
The MEMORY STARTS are sequentially numbered from 1 to the total of Memory Starts entered into the instrument. The figure to the right shows memory start 1 of 250 selected (1/250 in the upper right hand corner). Pressing [INSERT ↑] or [INSERT ↓] will insert a memory start above or below the highlighted position respectively. All other memory starts will be moved down unchanged.
∙The “(Factory)” presets are for standard tests to check the performance and/or calibrate the instrument.
∙The Up and Down Arrow Keys move the highlight one line at a time.
∙The keys at the bottom of the display allow the memory starts to be cut, copied, inserted and printed. See page 35 and 36 for more information on CUT, COPY, INSERT ↑, INSERT ↓, and PRINT memory starts.
AZI Customer Service | Page 23 of 92 |