PRINT Memory Start
This command prints the stored parameters. All of the numbered Memory Start Sets are printed, giving the values of the parameters shown below in the print out example.
COMPUTRAC MAX 5000XL MEMORY START REPORT |
|
COMPANY: AZI Preferred Customer | UNIT #: 500061 |
# IDTST IDL HST SSZ SWN T/I TOT EC MODE
1 | WEIGHT | 105 | 25 | 25 | 8.0 | 1.0 | I | No | Rate 1.0000%/Minute |
2 | TARTRATE | 150 | 80 | 25 | 8.0 | 1.0 | I | No | Rate 0.0250%/Minute |
3 | LACTOSE MONOHYDR 135 | 80 | 25 | 4.0 | 0.5 | I | No | Rate 0.1000%/Minute | |
4*MILK MOISTURE | 210 | 50 | 25 | 5.0 | 0.5 | I | No | Rate 0.1000%/Minute | |
5 | MILK ASH | 575 | 25 | 25 | 5.0 | 0.5 | T | No | Rate 0.0500%/Minute |
6 | DRIFT | 200 | 80 | 25 | 50.0 | 1.0 | I | No | Time 20min |
7 | Memory Start 7 | 160 | 25 | 25 | 8.0 | 1.0 | I | No | Rate 0.1000%/Minute |
128 | Memory Start | 160 | 25 | 25 | 8.0 | 1.0 | I | No | Rate 0.1000%/Minute | ||
129 | Memory | Start | 160 | 25 | 25 | 8.0 | 1.0 | I | No | Rate | 0.1000%/Minute |
250 | Memory | Start | 160 | 25 | 25 | 8.0 | 1.0 | I | No | Rate | 0.1000%/Minute |
Page #0X
NOTE: If all locations have been entered, a full printout of the Memory Starts will take five pages to print all 250 sets, otherwise only those Memory Starts that have been entered will be printed.
The column headings are abbreviations for the following:
# | Identification Number of the Memory Start Set |
ID | Identification Name of the Memory Start Set (an * in the list |
| indicates the set is linked to the next Memory Set) |
TST | Programmed Test Temperature |
IDL | Programmed Idle Temperature |
HST | Programmed HISTART Temperature |
SSZ | Sample Size |
SWN | Sample Window |
T/I | Test selection using Total or Individual test result |
TOT | Test calculation based on total weight |
EC | Ending Criteria |
MODE | Details for selected ending criteria |
AZI Customer Service | Page 36 of 92 |
