Result Display Options
DISPLAY RESULT AS: Selects the final display value of moisture, solids or dry weight, ash or LOI.
% Moisture - Test results are displayed as a percentage of weight loss.
% Solids - Test results are displayed as a percentage of weight remaining. The
instrument is optimized to run in %Solids for samples > 99.5% volatiles.
% Dry Weight - Test results are displayed as a dry weight basis.
% Dry Weight = ((WINITIAL – WFINAL) / WFINAL) * 100
Note that the dry weight value ratio can exceed 100%, and often does in applications such as soil and forest fuels analysis.
% Ash – Test results are displayed as a percentage of weight remaining.
% LOI – Test results are displayed as a percentage of weight loss.
Low Limit – sets the lowest acceptable limit for the test. A final test value below this figure will cause a FAIL indication to appear on the display and, if selected in setup, on printed reports.
High Limit – sets the highest acceptable limit for the moisture test. A final test value above this figure will
cause the FAIL indication to appear on the display and, if selected in setup, on printed reports.
Low Moisture CF
Low Moisture CF - For extremely low moisture products, a calibration factor can be used to align MAX 5000XL results to the reference standard. The percentage difference between the stabilized MAX 5000XL mean values and the reference standard is entered as the LOW MOISTURE CF. This feature is not typically used.
AZI Customer Service | Page 32 of 92 |
