Arizona MAX-5000XL user manual Use This Test Weight For Total Calculations?

Use This Test Weight For Total Calculations?

Toggle this parameter to YES if this test’s starting weight is to be used in Total Result calculations for this or later linked tests. The starting weight for this test will be used for total calculations until another YES is encountered. Note the starting weight of the

first test in a linked series is used for total calculations until a YES is encountered.

∙Purity Factor – Toggle this parameter to YES if a value, provided by the user, is to be entered as a parameter for the purity calculation. The default number is 4.778, which is the

purity factor for gypsum. The purity result is Purity Factor times the Moisture loss.

∙Allow Moisture Gain - When testing some materials, the linked test option is used. The first test is the free moisture test, which drives off any free moisture. However, some materials if already dried might actually collect moisture during this test. With the Allow Moisture Gain enabled, the collected moisture will be reported. Ending Criteria for this test is usually “Rate or Time”. If “Rate” is used the test would never end if the sample gained moisture.

AZI Customer Service 800-528-7411 or 602-470-1414 Page 34 of 92