Arizona MAX-5000XL CUT Memory Start, COPY Memory Start, INSERT Memory Start, ∙ Press COPY

CUT Memory Start

This command removes a memory start, which can be optionally inserted at another location. Use this carefully. The “(Factory)” memory starts cannot be deleted with this option.

COPY Memory Start

To quickly create a new set similar to an old one, use [COPY] from one location, move the highlight bar to the desired location and [INSERT↑] or [INSERT↓] into a new location.

∙Highlight the memory start set you wish to copy.

∙Press [COPY].

∙Using the Up and Down Arrow Keys highlight the location where you want the new memory start to be and press [INSERT↑] or [INSERT↓].

The contents of the locations are safe. Memory starts above the insert will not be affected and memory starts below the insert will be moved down the list

INSERT Memory Start

Pressing [INSERT↑] or [INSERT↓] will insert a new memory start either above or below the cursor location and move the following memory starts down.

AZI Customer Service 800-528-7411 or 602-470-1414 Page 35 of 92