Arizona MAX-5000XL user manual Oven Cleaning, Cleaning Reminder Setup

Oven Cleaning

This selection is the start of an oven cleaning process that burns off most residue build-up in the oven. Use a fume hood to remove possible toxic

emissions from the work place. Similar to the self-cleaning mode

in a home oven, the process turns the heating elements on to reach an oven temperature of 550º C in less than 22 minutes. The oven temperature will be maintained for a total oven cleaning time of 45 minutes from start to finish. The heat generated makes the top of the instrument hotter than normal. Extreme caution should be used to prevent injury until the instrument has cooled down at the conclusion of the

cleaning cycle. During the cleaning cycle, there may be smoke, odor, and possible toxic emissions produced by the instrument. This is normal as the residue is burned off the oven lining. Use a fume hood to remove the fumes and smoke from the work place. Consult the MSDS on your sample materials to determine the content of the emissions.

For a complete description of the oven cleaning procedure, see section beginning on page 80.

Cleaning Reminder Setup

A CLEANING REMINDER is available to remind you to clean the oven regularly. The default factory settings are:

ENABLE - No

TIME – 00:00 INTERVAL - 0 Weeks

∙To turn the prompt on or off, or adjust the interval, go to the Main

Test Screen and select in order: MENU, CALIBRATION MENU, OVEN SELF CLEANING, and CLEANING REMINDER SETUP.

Enable – Toggle to YES to enable the prompt or NO to prevent the prompt from appearing.

Time – The time the prompt is to appear, usually the start of the shift (using a 24 hour format).

Interval – The interval between calibrations (in weeks). If the interval is set to

“00”, the reminder will occur daily.

AZI Customer Service 800-528-7411 or 602-470-1414 Page 49 of 92