Calibration Reminder Setup
A TEMPERATURE CALIBRATION REMINDER is available to remind you when scheduled calibrations are due. The default factory settings are:
ENABLE - No
TIME – 00:00 INTERVAL - 0 Weeks
∙To turn the prompt on, off, or adjust the interval, go to the Main Test Screen and select in order: MENU, CALIBRATION MENU, TEMPERATURE CALIBRATION, and CALIBRATION REMINDER SETUP.
Enable – Toggle to YES to enable the prompt or NO to prevent the prompt from appearing.
Time – The time the prompt is to appear, usually the start of the shift (using a 24 hour format).
Interval – The interval between calibrations (in weeks). If the interval is set to “00”, the reminder will occur daily.
AZI Customer Service | Page 46 of 92 |
