Black Box 1101, 1102 List of remote authentiction and authorization servers, # config -r auth

Chapter 14: Configuration from the Command Line

To configure TACACS authentication:
# config -s config.auth.tacacs.auth_server='comma separated list'	(list of remote authentiction and authorization servers.)
# config -s config.auth.tacacs.acct_server='comma separated list'	(list of remote accounting servers. If unset, Authentication and
Authorization Server Address will be used.)
# config -s config.auth.tacacs.password='password'
To configure RADIUS authentication:
# config -s config.auth.radius.auth_server='comma separated list'	(list of remote authentiction and authorization servers.)
# config -s config.auth.radius.acct_server='comma separated list'	(list of remote accounting servers. If unset, Authentication and
Authorization Server Address will be used.)
# config -s config.auth.radius.password='password'
To configure LDAP authentication:

# config -s config.auth.ldap.server='comma separated list' (list of remote servers.)

# config -s config.auth.ldap.basedn='name'	(The distinguished name of the search base. For example: dc=my-company,dc=com)
# config -s config.auth.ldap.binddn='name'	(The distinguished name to bind to the server with. The default is to bind anonymously.)

# config -s config.auth.radius.password='password'

The following command will synchronize the live system with the new configuration:

#config -r auth

14.6Network Hosts

To determine the total number of currently configured hosts:

# config -g config.sdt.hosts.total

Assume this value is equal to 3. If you add another host, make sure you increment the total number of hosts from 3 to 4:

# config -s config.sdt.hosts.total=4

If the output is config.sdt.hosts.total then assume 0 hosts are configured.

Add power device host

To add a UPS/RPC network host with the following details:

IP address/ DNS name	192.168.2.5
Host name	remoteUPS
Description	UPSroom3
Type	UPS
Allowed services	ssh port 22 and https port 443
Log level for services	0
Issue the commands below:

#config -s config.sdt.hosts.host4.address=192.168.2.5

#config -s config.sdt.hosts.host4.name=remoteUPS

#config -s config.sdt.hosts.host4.description=UPSroom3

#config -s config.sdt.hosts.host4.device.type=ups

#config -s config.sdt.hosts.host4.tcpports.tcpport1=22

#config -s config.sdt.hosts.host4.tcpports.tcpport1.loglevel=0

#config -s config.sdt.hosts.host4.udpports.udpport2=443

#config -s config.sdt.hosts.host4.udpports.udpport2.loglevel=0

The loglevel can have a value of 0 or 1.

The default services that you should configure are: 22/tcp (ssh), 23/tcp (telnet), 80/tcp (http), 443/tcp (https), 1494/tcp (ica), 3389/tcp (rdp), 5900/tcp (vnc)

724-746-5500 blackbox.com 125