Black Box Secure Device Servers, 1102, 1101 manual Port Log, To delete the above managed device

Chapter 14: Configuration from the Command Line

#config -s config.ports.port2.power.type=APC 7900

#config -s config.ports.port2.power.name=MyRPC

#config -s "config.ports.port2.power.description=RPC in room 5"

#config -s config.ports.port2.power.username=rpclogin

#config -s config.ports.port2.power.password=secret

#config -s config.ports.port2.power.snmp.community=v1

#config -s config.ports.port2.power.log.enabled=on

#config -s config.ports.port2.power.log.interval=600

#config -s config.ports.port2.power.outlets=4

The following five commands are used by the Management Console to add the RPC to “Managed Devices”:

#config -s config.devices.device3.connections.connection1.name=myRPC

#config -s "config.devices.device3.connections.connection1.type=RPC Unit"

#config -s config.devices.device3.name=myRPC

#config -s "config.devices.device3.description=RPC in room 5"

#config -s config.devices.total=3

The following command will synchronize the live system with the new configuration:

# config –a

14.11 Managed Devices

To add a managed device: (also see UPS, RPC connections and Environmental)

#config -s "config.devices.device8.name=my device"

#config -s "config.devices.device8.description=The eighth device"

#config -s "config.devices.device8.connections.connection1.name=my device"

#config -s config.devices.device8.connections.connection1.type=[serial Host UPS RPC]

# config -s config.devices.total=8 (decrement this value when deleting a managed device)

To delete the above managed device:

# config -d config.devices.device8

The following command will synchronize the live system with the new configuration:

#config –a

14.12Port Log

To configure serial/network port logging:

#config -s config.eventlog.server.address='remote server ip address'

#config -s config.eventlog.server.logfacility='facility'

'facility' can be: Daemon Local 0-7 Authentication Kernel

User

Syslog

Mail

News

UUCP

#config -s config.eventlog.server.logpriority='priority' 'priority' can be:

Info Alert Critical Debug Emergency Error

724-746-5500 blackbox.com 129