Black Box Secure Device Servers, 1102 Enable SDT for Nagios ext Enabled SDT gateway address

Chapter 14: Configuration from the Command Line

The following command will synchronize the live system with the new configuration:

# config –a

14.21 NAGIOS

To configure NAGIOS with the following settings:

NAGIOS host name	console at R3 (Name of this system)
NAGIOS host address	192.168.0.1 (IP to find this device at)
NAGIOS server address	192.168.0.10 (upstream NAGIOS server)
Enable SDT for NAGIOS ext.	Enabled
SDT gateway address	192.168.0.1 (defaults to host address)
Prefer NRPE over NSCA	Disabled (defaults to Disabled)

#config -s config.system.nagios.enabled=on

#config -s config.system.nagios.name=les1116

#config -s config.system.nagios.address=192.168.0.1

#config -s config.system.nagios.server.address=192.168.0.10

# config -s config.system.nagios.sdt.disabled=on (diables SDT for nagios extensions)

#config -s config.system.nagios.sdt.address=192.168.0.1

#config -s config.system.nagios.nrpe.prefer=''

To configure NRPE with following settings:
NRPE port	5600 (port to listen on for nrpe. Defualts to 5666)
NRPE user	user1 (User to run as. Defaults to nrpe)
NRPE group	group1 (Group to run as. Defaults to nobody)
Allow command arguments	Enabled

#config -s config.system.nagios.nrpe.enabled=on

#config -s config.system.nagios.nrpe.port=5600

#config -s config.system.nagios.user=user1

#config -s config.system.nagios.nrpe.group=group1

#config -s config.system.nagios.nrpe.cmdargs=on

To configure NSCA with the following settings:

NSCA encryption	BLOWFISH (can be: [ None XOR DES TRPLEDES CAST-256 BLOWFISH TWOFISH RIJNDAEL-256
	SERPENT GOST ]
NSCA password	secret
NSCA check-in interval	5 minutes
NSCA port	5650 (defaults to 5667)
user to run as	User1 (defaults to nsca)
group to run as	Group1 (defaults to nobody)

#config -s config.system.nagios.nsca.enabled=on

#config -s config.system.nagios.nsca.encryption=BLOWFISH

#config -s config.system.nagios.nsca.secret=secret

#config -s config.system.nagios.nsca.interval=2

#config -s config.system.nagios.nsca.port=5650

#config -s config.system.nagios.nsca.user=User1

#config -s config.system.nagios.nsca.group=Group1

Then synchronize the live system with the new configuration using # config -a

724-746-5500 blackbox.com 135