Specifications | Black Box Secure Device Servers, 1102, 1101

Chapter 1: Specifications

1. Specifications

CPU: MIcrel KS8695P controller

Memory: 16 MB SDRAM, 8 MB Flash

Serial Baud Rates: 2400 to 115,200 bps

Connectors: LES1101A: (1) DB9 RS-232 serial, (1) RJ-45 10/100BASE-T Ethernet;

LES1102A: (2) DB9 RS-232 serial, (1) RJ-45 10/100BASE-T Ethernet

Indicators: LES1101A: (4) LEDs: Power, Activity, On RJ-45: Connectivity, Activity

LES1102A: (5) LEDs: Power, Serial 1, Serial 2, On RJ-45: Connectivity, Activity

Temperature Tolerance: Operating: 41 to 122° F (5 to 50° C);

Storage: -20 to +140° F (-30 to +60° C)

Humidity Tolerance: 5 to 90%

Power: (1) 12-VDC universal input external wallmount power supply,100–240 VAC, 50/60 Hz

Size: LES1101A: 4”H x 1.75”W x 1”D (10.2 x 4.5 x 2.5 cm);

LES1102A: 3.9”H x 2.8”W x 1”D (10 x 7.2 x 2.5 cm)

Weight: LES1101A: 0.25 lb. (0.11 kg);

LES1102A: 1 lb. (0.45 kg)

724-746-5500 blackbox.com

9

Image 9

Black Box Secure Device Servers, 1102, 1101 manual Specifications

Contents

1102 Secure Device Servers 1102 Secure Device Servers FCC and IC RFI Statements Normas Oficiales Mexicanas NOM Electrical Safety Statement Trademarks Used in this Manual Table of Contents Local Authentication Tacacs Authentication SMS Alerts Snmp AlertsAdd a New Alert 107 106108 110 PowerMan Tool Installing the Key and CertificatePmpower Tool Fingerprinting Specifications Specifications Overview 2.1 Introduction Manual OrganizationTypes of Users Overview Management ConsoleHardware Description 2.5.1 LES1101A Front Panel 2 LES1101A Back Panel Number Component Description DB9 connectorEthernet Connectivity LED RJ-45 Ethernet Activity LED left side of connector Ethernet Connectivity LED Number Component Description Barrel connector PowerLED right side of connector Ethernet Activity LED 3 LES1102A Front Panel What’s Included 1 LES1101A2 LES1102A Installation InstallationPower Connection Network Connection Non RS-232 Serial Port Pinouts- LES1102A +3V Non RS-232 Serial Port Pinouts- LES1101ARX+ TX+ +VIN TX + System Configuration Connected PC/Workstation SetupManagement Console Connection Browser connection System Configuration Administrator Password Network IP Address IPv6 configuration System Services System Services screen SDT connector SSH encrypted SDT ConnectorCommunications Software Forwarded to SSHTerm PuTTY Configure Serial Ports Serial Port, Host, Device, and User Configuration Common Settings Serial Port, Host, Device, and User Configuration Console Server Mode Serial Port, Host, Device, and User Configuration 1102 Secure Device Servers SDT Mode Device RPC, UPS, EMD Mode Terminal Server ModeSerial Bridging Mode Local Ethernet LAN LES1102A COM port Syslog Add/ Edit Users Serial Port, Host, Device, and User Configuration Network Hosts Authentication Serial Port Redirection Trusted Networks LES1102A Retail data systems Managed Devices Serial Port, Host, Device, and User Configuration Secure SSH Tunneling and SDT Connector Secure LocalLES1102A Serial Connected Configuring for SSH Tunneling to Hosts Secure SSH Tunneling and SDT ConnectorSDT Connector Client Configuration SDT Connector installation 1102 Secure Device Servers Secure SSH Tunneling and SDT Connector Make an SDT Connection through the Gateway to a Host Manually Adding Hosts to the SDT Connector Gateway 10. Clients Manually Adding New Services to the New Hosts 1102 Secure Device Servers Adding a Client Program to be Started for the New Service 16. Telnet client Click OK 17. Edit SDT host screen SDT Connector to Management Console 1102 Secure Device Servers Secure SSH Tunneling and SDT Connector Importing and Exporting Preferences SDT Connector Public Key Authentication Setting up SDT for Remote Desktop Access 23. Remote Desktop Users dialog box Configure the Remote Desktop Connection Client Use -p to receive password prompt Computer, enter the appropriate IP Address and Port NumberGeometry width x height or 70% screen percentage SDT SSH Tunnel for VNC For Linux servers and clients Install, Configure, and Connect the VNC Viewer 30. VNC authentication 1102 Secure Device Servers 33. Incoming TCP/IP properties Set up SDT Serial Ports on Console Server Address of port01. Then select the RDP Service check box SSH Tunneling Using other SSH Clients for example, PuTTY 1102 Secure Device Servers Secure SSH Tunneling and SDT Connector 1102 Secure Device Servers Alerts and Logging Configure SMTP/SMS/SNMP/Nagios Alert ServiceAlerts and Logging Email Alerts SMS Alerts Snmp AlertsSelect Alerts & Logging Snmp Activate Alert Events and Notifications Nagios Alerts Add a New Alert Configuring General Alert Types Serial port signal alert This alert type monitors UPSes, RPCs, and power devices Configuring Power Alert Type Remote Log Storage Serial Port LoggingNetwork TCP or UDP Port Logging 1102 Secure Device Servers Power Management Power ManagementRemote Power Control RPC RPC Connection 1102 Secure Device Servers User Power Management RPC Access Privileges and Alerts Uninterruptible Power Supply Control UPS RPC StatusTurn on Turn OFF Cycle Status Serial, USB, or Network Connections Managed Managed UPS Connections Click Add Managed UPS As Device Type UPS and clicking Apply Power Management Remote UPS Management Controlling UPS Powered Computers UPS AlertsUPS Status 12. Log table Overview of Network UPS Tools NUT Refer to 1102 Secure Device Servers Authentication Configuration AuthenticationLocal Authentication Tacacs Authentication Enter the Server Password Radius Authentication RADIUS/TACACS User Configuration Ldap Authentication Pamtacplus PAM Pluggable Authentication ModulesPamldap Radius Example SSL certificates screen SSL Certificate Confirm Challenge Password Challenge PasswordCommon name Organizational Unit Upload button LES1102A Network Managed hosts Services Nagios IntegrationNagios Overview Central Management and Setting Up SDT for Nagios Nagios IntegrationDistributed console servers Black Box console servers Setup Distributed Console Servers Setup Central Nagios Server Description enter Administrator connection Configuring Nagios Distributed Monitoring Enable Nagios on the Console ServerSelect Users & Groups from the Serial & Network menu Enable Nsca Monitoring Enable Nrpe MonitoringLES1102A Serial Check Nagios Tunneled SSH LES1102A Sendncsa Program/script Nagios Configure Selected Serial Ports for Nagios Monitoring Configure Selected Network Hosts for Nagios MonitoringConfigure the Upstream Nagios Monitoring Host Commandname checkserialstatus Commandline Commandname checknrpedaemon CommandlineDefine service Hostname Server Use Generic-service Server Use Generic-service Define service Servicedescription port-log-serverActivechecksenabled Passivechecksenabled Checkportlog Number of Supported Devices Basic Nagios Plug-Ins Distributed Monitoring Usage Scenarios Using Nagios in a local office Remote site Remote site with restrictive firewall System Management System Administration and Reset System Management Upgrade Firmware Configuration Backup Configure Date and Time 109 Select the Status Port Access Port Access and Active UsersStatus Reports Statistics Support Reports Status Reports Select Status Syslog Dashboard Configure dashboard screen Configuring the Dashboard Echo table Creating Custom Widgets for the Dashboard Management ManagementDevice Management Port and Host Logs Select Manage Terminal Serial Port Terminal Connection Select Manage Power Accessing config from the Command Line Configuration from the Command Line Config tool Configuration from the Command Line# config -g config.users.user1.description # config -g config Serial Port Configuration SDT mode Device Mode Serial bridge mode Terminal server modeSyslog settings Adding and Removing Users # config -r users # ./delete-node config.users.user2 # config -a # config -g config.groups.totalAdding and Removing User Groups # rmuser Group7 # config -r auth List of remote authentiction and authorization servers# config -g config.sdt.hosts.total # config -s config.sdt.hosts.total=4 # config -g config.devices.total Log level for services# config -hosts # config -g config.portaccess.total # config -r cascade # config -s config.cascade.slaves.total=1Cascaded Ports UPS Connections # config -d config.ups.monitors.monitor1 # config -s config.ups.monitors.total=1RPC Connections Remote UPSes To configure serial/network port logging # config -d config.devices.device8Port Log To delete the above managed device Signal Alert General settings for all alertsAlerts Connection Alert Power Sensor Alert UPS Power Status Alert# config -r alerts Smtp and SMS Administration IP SettingsSnmp Date and Time Settings Services # config -r timeDhcp Server Prefer Nrpe over Nsca Disabled defaults to Disabled Enable SDT for Nagios ext Enabled SDT gateway addressTo configure Nrpe with following settings Nrpe port Nagios Advanced Configuration ! Bin/sh /etc/scripts/alert-email $suffix # ./delete-node config.users.user3 Echo Warning $TOTALNODE greater than number of items NEWTOTAL=$ $TOTAL Add the following line to rc.local# loop indefinitely While true do Etc/config/scripts/config-post # configUsage /etc/scripts/backup-usb Command File # /etc/scripts/backup-usb check-magic Etc/config/pmshell-start.sh #!/bin/sh PORT=$1 USER=$2 Config --set config.system.snmp.trapport2=162 Config --set config.system.snmp.address2=w.x.y.zTo set the Manager Address field To set the Community field Snmp version 1 and 2c only $& ! $&$ $&% ! #$! Chown fred /etc/config/users/fred/.ssh/authorizedkeys#$ $ mkdir keys $ ssh-keygen -t rsa Http//openssh.org/portable.html ! Http//www openbsd.org/cgi-bin/man.cgi?query=sshdOpenSSH Windows http//sshwindows.sourceforge.net/download # ssh remhost Ab7e33bd85505a430be0bd433f1ca5f8 Offending key in /.ssh/knownhosts1 Client Keys Uploading Keys Authorized Keys !$ % +- ! !! #$ #$! #% #% Target Specification Powerstrip IdName or ID of the device support/id Powerstrip Pport PpasswordTargetaddress Username # #%& Appendix A. Linux Commands and Source Code Appendix a Linux Commands and Source CodeAdd a group or add an user to a group Add an user GNU Bourne-Again Shell Reboot LoginIp6tables Iptables-save Sleep VconfigSmbmnt Smbmount 164