Cabletron Systems CSMIM-T1 manual 8 ipx, Image -dcommand display looks like this, Ipx -d

Commands

The image –dcommand display looks like this:

monitor:: image -d

Image name: Default (ip): "oper.56.enet" Default (mop): "OPER_56_ENET.SYS"

TFTP Load Directory: ""

TFTP Dump path/filename: "dump.192.9.200.88"

SELF image name: "oper.56.enet"

NOTE

The SELF image name appears only if the self-boot image is loaded.

If the image file name contains more than 16 characters, it is truncated when MOP is attempted.

3.2.8ipx

The ipx command sets several parameters associated with IPX booting and dumping. This is useful when loading the CSMIM-T1’s operational image from a Novell file server. The command syntax is:

ipx [–d]

The ipx command display looks like this:

monitor:: ipx

Enter IPX file server name [<uninitialized>]::mars Enter Frame type, 0=802.3 1=Ethernet II 2=802.2 3=SNAP\ [802.3]::

Enter IPX dump user name [<uninitialized>]::susans

Enter IPX dump password [<uninitialized>]::********

Verify IPX dump password []::********

Enter IPX dump path [<uninitialized>]::SYS:\user\susans\

CSMIM-T1 Hardware Installation Guide 3-15