Cabletron Systems CSMIM-T1 manual 10 mop, 11 net, Mop -d, Net

Commands

3.2.10 mop

The mop command sets the MOP load/dump address. This is useful when the loading the CSMIM-T1’s operational image from a VAX VMS load host. The command syntax is:

mop [–d]

The mop command display looks like this:

monitor:: mop

Enter preferred MOP load/dump address [<uninitialized>]:: Load Broadcast Y/N [Y]::

The mop –dcommand displays the current MOP settings:

monitor:: mop -d

MOP preferred load/dump address <uninitialized> Load Broadcast: Y

3.2.11 net

The net command executes an Ethernet transceiver loopback test on the local area network. The command syntax is:

net

The net command display looks like this:

monitor:: net

Network test – PASSED

This transciever loopback test sends out a short test packet from the CSMIM-T1 through the MicroMMAC to test the integrity of the network. One of the Ethernet connections (internal AUI or external connection) must be valid for this test to pass.

CSMIM-T1 Hardware Installation Guide 3-17