CSMIM-T1 Hardware Installation Guide v

Notice to Users of T1 Service
The following instructions are provided to ensure compliance with the Federal
Communications Commission (FCC) Rules, Part 68.
1.) All direct connections to T1 lines must be made using standard plugs and
jacks.
2.) Before connecting the unit, you must inform the local telephone company
of the following information:
3.) If the unit appears to be malfunctioning, it should be disconnected from the
telephone lines until you learn if your equipment or the telephone line is
the source of the trouble. If your equipment needs repair, it should not be
reconnected until it is repaired.
4.) The CSU/DSU has been designed to prevent harm to the T1 network. If the
telephone company finds that the equipment is exceeding tolerable
parameters, the telephone company can temporarily disconnect service,
although they will attempt to give you advance notice if possible.
5.) Under FCC Rules, no customer is authorized to repair this equipment. This
restriction applies no matter whether the equipment is in or out of warranty.
6.) If the telephone company alters their equipment in a manner that will affect
use of this device, they must give you advance warning so as to give your
company the opportunity for uninterrupted service. You will be advised of
your right to file a complaint with the FCC.
7.) In the event of equipment malfunction, all repairs should be performed by
our company or an authorized agent. It is the responsibility of users
requiring the service to report the need of service to our company or to one
of our authorized agents.
Port ID REN/SOC FIC USOC
CSMIM-T1
(Network Port)
CSMIM-T1 (Drop
and Insert Port)
6.0Y
6.0P(XD)
04DU9-BN
04DU9-DN
04DU9-1KN
04DU9-1ZN
04DU9-1SN
RJ48C
N/A