Cabletron Systems CSMIM-T1 manual 2illustrates the \Kn command

Commands

NOTE

In reliable link connect state, the sender's Break control setting determines how the receiver handles the Break.

Table 7-2illustrates the \Kn command

Table 7-2 The \Kn Command

	Local DTE sends	Local DTE sends	Local modem	Remote
	Break during reli-	\Bn; local modem	sends Break	modem sends
	able or normal	in command	during direct	Break during
	connection	mode, during reli-	connection	normal connec-
		able or normal		tion
		connection
	Enter command	Empty data buff-	Send Break to	Empty data buff-
\K0	state; no Break to	ers; send Break to	remote system;	ers; send Break
	remote system*	remote system	set modem to	to serial port
			command state
\K1	Empty data buff-	Same as \K0	Send Break to	Same as \K0
	ers; send Break to		remote system
	remote system
\K2	Same as \K0*	Immediately send	Same as \K0	Immediately
		Break to remote		send Break to
		system		serial port
\K3	Immediately send	Same as \K2	Same as \K1	Same as \K2
	Break to remote
	system
	Same as \K0*	Send Break to	Same as \K0	Send Break to
\K4		remote system in		serial port in
		sequence with		sequence with
		any transmit data		receive data
		being buffered		being buffered
	Send Break to	Same as \K4	Same as \K1	Same as \K4
\K5	remote system in
	sequence with
	transmit data

*Forces the modem to command state. To transmit a Break and enter connect state, type: AT\BO <Enter>.

CSMIM-T1 Hardware Installation Guide 7-19