Cabletron Systems ZX-250 manual Unpacking the Switch, Check Accessory Carton Contents

2 SWITCH INSTALLATION AND SETUP

After you read this chapter, you will be able to perform the following tasks:

UInitial installation of the switch

UComplete the initial configuration

UUse the console interface

UInstall the SmartSwitch ATM Administrator graphical management software

2.1UNPACKING THE SWITCH

Remove the accessory carton from the ZX-250 shipping box. Carefully remove the switch from its packing material.

2.2CHECK ACCESSORY CARTON CONTENTS

Open the accessory carton and check that it contains the following items:

—7-foot UTP cable terminated on both ends with RJ-45 connectors

—6-foot AC power cord (1 or 2 cords depending on switch model and options)

—RJ-45 to 9-pin female adapter (labeled PC)

—Console cabling instruction sheet

—Diskettes containing switch software, MIB files, SmartCell ATM Administrator software, and release notes

—Two rack-mount brackets

—two-hole brackets for ZX-250

—four-hole brackets for ZX-250r

—Rack mount bracket screws

—four #8-32 x 0.38 flat head screws for ZX-250

—four #8-32 x 0.38 flat head screws, four #6-32 x 0.38 flat head screws for ZX-250r

—SmartCell ZX-250 Release Notes

—SmartCell ZX-250 User Guide

—SmartCell 6A000/ZX-250 Reference Manual

2p›F If any of these items are missing, contact Cabletron customer support immediately.

SmartCell ZX-250 User Guide 2-1