Cabletron Systems ZX-250 manual After brackets are attached, mount the switch in the rack

Switch Installation and Setup Installing the Switch

¢• With the brackets in front of the rack’s uprights, attach the brackets to the rack, using two (2) #10-32 x 0.50 flat-head screws on each side (see Figure 2-6).

>"•mamV The ZX-250 switch is heavy enough to make one-person installation difficult. For this reason, it is advisable to have someone assist you.

Figure 2-6 After brackets are attached, mount the switch in the rack.

%"¤›apm The mounting brackets must be attached to the switch before mounting the switch on the rack. Each switch must be mounted to the rack with all four (4) screws. Every switch must be supported by its own brackets. DO NOT stack a unit directly on top of a mounted switch. DO NOT use rack-mounted shelves that interfere with air flow.

SmartCell ZX-250 User Guide 2-7