Switch Installation and Setup | SmartSwitch ATM Administrator |
To obtain an explanation of a command and its parameters, enter the word help (or ?) before the command.
SmartCell ZX # ? add laneclient
Create LANE Client
============================================================================
ClientNumber | Local Client Number | ||
LanName | Name of | the ELAN to | join |
ServerType | Type of | LANE Server | [LECS, LES] |
ServerAddress | ATM Address of the LANE Server | ||
IPAddress | IP Address of the Client | ||
NetMask | IP Netmask of the Client | ||
MTU | MTU for | the Client [1516, 9234, NONE] | |
SmartCell ZX # |
|
|
|
While entering a command, you can obtain help about the current parameter by entering a question mark (?) at the prompt. For example:
SmartCell ZX # add atmroute |
|
PortNumber(A1) | : a3 |
AtmAddress() | : 39:00:00:00:00:00:00:00:00:00:14:72:80 |
PrefixLength(104) | : |
Index(0) | : |
Type(Internal) | : ? |
The type of reachability. Use Internal, Exterior, or Reject. | |
Type(Internal) | :exterior |
Scope(0) | : |
MetricsTag(0) | : |
SmartCell ZX # |
|
2p›F Press the Esc key to back out of any command before you enter the last value.
2.7SMARTSWITCH ATM ADMINISTRATOR
SmartSwitch ATM Administrator is a Windows application that manages SmartCell ATM switches. It supports the following operations:
USwitch management
UEmulated Local Area Network (ELAN) management
UConnection management
UAlarm management
USwitch discovery
Additionally, the SmartSwitch ATM Administrator provides the following capabilities that are not available from the console interface:
UUse a graphical user interface
UPerform drag and drop operations
UManage all switches from one console
UPerform transactions across multiple switches (for example, create an ELAN when the servers are not
SmartCell
