SmartSwitch ATM Administrator | Switch Installation and Setup |
Figure 2-10 SmartSwitch ATM Administrator
2p›F Capabilities that are not available from the SmartSwitch ATM Administrator are debugging and tracing.
SmartSwitch ATM Administrator can be installed on a PC running Windows NT 4.0, Windows NT 3.51, or Windows 95, and requires the following PC hardware configuration:
UPentium 133 Mhz or faster processor
U20 MB disk space
U32 MB RAM
UMonitor with resolution of at least 800 x 600 pixels
UNetwork connections (either Ethernet or ATM) to the switches you manage
2.7.1Installation Steps
The installation process for SmartSwitch ATM Administrator is essentially the same for all the supported operating systems. Follow these instructions for installation on NT 4.0, NT 3.5.1, or Win95.
