qInfrared communication port
Align this port with the infrared communication port of the Rugged PDA for IrDA data
communication.
wThe Rugged PDA detection switch
This switch detects when the Rugged PDA is correctly mounted on the Bridge Satellite
Cradle.
eStatus lamp
POWER | OFF: | Power OFF |
| Green: | Power on, the Rugged PDA is mounted correctly |
| Red: | Power on, the Rugged PDA is not mounted |
|
| |
DATA | Indicates the data communication status. | |
| Off: | No communication |
| Flashing Green: | Communicating |
| Red: | Bridge Satellite Cradle connection problem |
|
|
|
LINE | Off: | System not operational |
| Green: | System operational |
|
|
|
rPower contacts
These terminals supply power to the Rugged PDA.
tPower switch
Turns Bridge Satellite Cradle power on and off.
yPower adaptor port (DC IN 12V 
) Connect the AC adaptor's power cord here.
u
Use these ports when connecting up to eight Bridge Satellite Cradles in series.
i
This port is used when connecting to a PC for data transfer.
oUSB port (
)
This port is used when connecting to a PC for data transfer.
!0DIP switches
Use these switches to configure Bridge Satellite Cradle basic settings (See page 111).
Keep the power contacts clean by wiping them with a soft, dry cloth or a cotton swab. Dirty power contacts can cause poor contact and de- crease charging efficiency.
