To send from a program
1. Start up the program whose data you want to send.
• To send Contacts data, for example, tap 
➔ Contacts.
2.Tap and hold the data you want to send.
2
On the
Beam Contact....
To send from File Explorer
1.
2.
3.
Start up File Explorer.
Tap and hold the file you want to send.
On the shortcut menu, tap Beam Contact....
• You cannot send a folder using infrared communication.
• Only files can be sent from File Explorer. To send Contacts, Calen- dar, or Tasks data, perform the send operation from the applicable program.
To Receive Data
1.
2.
Aligning the infrared communication ports of the two Rugged PDAs, position them close to each other taking care there is nothing blocking the path between them.
On the sending unit, perform the required send procedure. The data will be received automatically by the destination side.
•When a confirmation message asking whether you want to receive the data appears, perform the required operation as instructed by the message.
Infrared Communication | 93 |
