To Transfer Data
Perform the following procedure to transfer data.
1. Position the two Rugged PDAs no further than about 30 cm from each other, and so their infrared communication ports are facing each other.
2. On the original side, tap and hold the data item or file you want to send. Then on the shortcut menu that appears, tap Beam File....
•The data send operation can be performed from the program that
3.
4.
created the data or from File Explorer.
Data transfer will start. A message will remain on the display to indicate that data transfer is in progress.
Completion of data transfer will be indicated by a message on the displays of both the original and the destination sides.
•Tap the Close button on the message screen.
Data Send Operation
Data can be sent using infrared communication using either of the two methods described below.
•Sending from the program used to created the data or file
Files created using Calendar, Contacts, Tasks, Notes, Pocket Word, or Pocket Excel can be sent from the applicable program.
•Sending from File Explorer
File Explorer can be use to send files stored in the Rugged PDA main memory or on a memory card.
92
