The Rugged PDA and AC adaptor may become warm during use.
•This is caused by the CPU operation or the current when the Rugged PDA's battery is charged. This is not malfunction. The heating value charges according to the con- dition of use.
•When the Rugged PDA or the AC adaptor is warmer than usual, shut down the power, unplug the power cord of the AC adaptor and remove the battery pack. Contact your original dealer or authorized CASIO distributor.
Do not continue operating the Rugged PDA until the battery completely discharges.
•Doing so may result in loss of or damage to your data. Recharge the battery before it discharges completely.
Use the stylus provided.
•When writing on the screen, be sure to use only the stylus provided (or a similar product with a soft tip that is not sharp). Remove any dust or dirt from the screen and the tip of the stylus before writing on the screen. Dirt or dust makes it difficult to write on the screen and may scratch it.
Avoid using the Rugged PDA in the following locations.
•Places where there is a lot of dust.
•Be careful when using the Rugged PDA in locations where the surrounding tempera- ture is extremely hot or cold, such as in a car in direct sunlight, in front of heater.
•Places that are very humid or damp.
Avoid vibration and strong impact.
•Strong vibration or impact may damage the Rugged PDA or important data. It also might damage the LCD screen.
Do not use the Rugged PDA in the rain or places where water may get on it.
•The Rugged PDA is water
•If rain or water gets on the Rugged PDA, carefully wipe it with a dry cloth.
16
