Chapter 2 Setting Up the Switch
Set Up the Switch (No Network)
Step 6
After you click Submit, these events occur:
•The Express Setup program ends.
•The connection between the switch and your PC or laptop ends.
•If your PC or laptop is connected to a DHCP server, your PC or laptop loses its IP address that was used during the initial setup.
•Your browser session displays an error page.
Verify that the ADMIN LED is off, which means that the switch is configured with the IP address that you entered in the Express Setup window and that the initial setup is complete.
Troubleshooting:
If the ADMIN LED continues to blink green, it means that the switch is still not configured with an IP address. Repeat Step 1 to Step 5.
If the problem persists:
1.Disconnect the Ethernet cable from the switch.
2.Repeat Step 3 to Step 5.
SYST |
|
ALRT |
|
PoE |
|
POWER | ETHERNET |
| |
ADMIN |
|
Catalyst Express 520
Series
201616
| User Guide for the Catalyst Express 520 Switches |
