Chapter 5 Changing the Switch Network Settings
Change the Switch IP Information
Change the Switch IP Information
The network settings enable the switch to operate with its standard default settings and to be managed through the device manager. These settings were set during the initial setup. You would need to change these settings if you want to move the switch to a different management VLAN or to a different network.
You can change these network settings through the Express Setup window on the device manager:
•Management interface (VLAN ID)
•IP assignment mode (DHCP)
•IP address
•Subnet mask list
•Default gateway
See the device manager online help for complete guidelines and procedures.
During the initial setup, a username and password to the switch might have been assigned. The default username is cisco. The default password is cisco. You can find out or change this information through the Cisco Configuration Assistant.
Change Optional Administrative Settings
The optional administrative settings identify and synchronize the switch so that it can be managed properly. These settings might have been set during the initial setup. Change these settings if you need to change the switch name or its system clock.
You can changes these administrative settings through the Express Setup window on the device manager:
•Host name
•System date
•System time
•Time zone
•Daylight saving time
See the device manager online help for complete guidelines and procedures.
| User Guide for the Catalyst Express 520 Switches |
|
