Cisco Systems 520 manual Dual-Purpose Ports, Figure A-7 10/100/1000 Port Pinouts

Appendix A Reference

Connector Specifications

Dual-Purpose Ports

The Ethernet port on a dual-purpose port uses standard RJ-45 connectors.

Figure A-7shows the pinouts.

The SFP module slot on a dual-purpose port uses SFP modules for fiber-optic and copper uplink ports. See the “Supported Hardware” section on page 1-14for a list of supported SFP modules.

Note The auto-MDIX feature is enabled by default. For configuration information for this feature, see the Cisco Configuration Assistant online help.

Figure A-7 10/100/1000 Port Pinouts

Pin Label

1TP0+

2TP0-

3TP1+

4TP2+

5TP2-

6TP1-

7TP3+

8TP3-

1 2 3 4 5 6 7 8

60915

	User Guide for the Catalyst Express 520 Switches
OL-12761-02		A-9