Chapter 4 Connecting to the Switch
Warnings
Warnings
These warnings are translated into several languages in the Regulatory Compliance and Safety Information for the Catalyst Express 520 Switches document that shipped with the switch. Review these warnings before you connect devices to the switch.
Warning Class 1 laser product. Statement 1008
Warning Voltages that present a shock hazard may exist on Power over Ethernet (PoE) circuits if interconnections are made using uninsulated exposed metal contacts, conductors, or terminals. Avoid using such interconnection methods, unless the exposed metal parts are located within a restricted access location and users and service people who are authorized within the restricted access location are made aware of the hazard. A restricted access area can be accessed only through the use of a special tool, lock and key or other means of security. Statement 1072
Cabling Guidelines
Before connecting devices to the switch, make sure to observe these requirements and guidelines. Use these requirements and guidelines with the information in the “Cabling Guidelines” section on page
•Cabling is away from sources of electrical noise, such as radios, power lines, and fluorescent lighting fixtures.
•Cabling is safely away from other devices that might damage the cables.
| User Guide for the Catalyst Express 520 Switches |
|
